Booster MGC function Introduction
Our all signal booster include MGC Function , you can adjust the booster's Gain as your needed .
Manual Gain Control
What is MGC function? And what is the advantage?
l MGC function means Manual Gain Control
l when your outdoor signal too stronger, so the repeater can not work well and have noise, so you can adjust the Gain by
yourself ;
Manual Gain Control (MGC)
Code switch→Attenuation:
DL:1→1dB 2→2dB 3→4dB 4→8dB 5→16dB
UL:6→1dB 7→2dB 8→4dB 9→8dB 10→16dB
Switches1-5 represents Downlink and 6-10 represent Uplink.
When it is necessary to adjust the gain by the switch, firstly please adjust Downlink gain according to input signals, secondly
please adjust
Uplink gain according to Downlink gain. For Example you want to make the 3G Gain down 1dB, so you make the switches “1” and
“6”is OK.
The switches have default “OFF” status; please push relevant switches to “ON” position if certain attenuation value needs to be
achieved.
The Downlink attenuation setting
The Uplink attenuation setting